When you are buried in powder on a Shredder or ticking off one trail after another on a Rave RE, the last thing you want is to stop and dig your phone out of your jacket. With the M-JET CarPlay activation, navigation apps and music from your iPhone run right on the 10.25" display of your Lynx. The iPhone stays stowed, and you look at the screen that is already in front of you.
Which Shredder and Rave models fit
| Model | From model year |
|---|---|
| Shredder RE | 2023 |
| Shredder DS | 2023 |
| Rave RE | 2024 |
The key point is that your sled really has the 10.25" display. It often came only with certain packages or as an option, for example on a spring order. Lynx models with a 4.5", 7.2" or 7.8" display are not compatible. The full list of every Lynx line is on the Lynx CarPlay page.
Shredder in deep snow: keep the map in view
After a few hours off trail, every slope looks the same. A navigation app on the big display shows where you are and how the way back down to the truck runs. You do not have to stand in waist-deep snow swiping at a tiny phone screen with thick gloves. Quick stop, glance at the display, keep going.
Whether an app loads map data out in the mountains or needs a signal for it is up to the app itself. CarPlay makes sure it runs on the original screen and responds to touch.
Rave RE on the trail: music without the fumbling
The Rave RE is built for fast, long trail days. Spotify, Apple Music or a podcast run through CarPlay, and on the display you pick a playlist or skip to the next track. That works at the gas stop, during a break at the cabin or while you wait at the next junction. Riding in a group, the map also shows you faster which fork is the right one when the rider ahead is already out of sight.
In practice: iPhone and cable on a sporty sled
On a sled that jumps, gets thrown sideways and sometimes ends up on its side in deep snow, the iPhone needs a fixed spot. Stow it in a protected compartment where it cannot fly around, and use a short, tough cable that does not snag when you climb on or off. Cold is hard on every battery, so a sheltered spot helps twice.
Activate once, then ride
You plug the M-JET dongle into the diagnostic port a single time, wait for the activation and unplug it again. From then on you connect an iPhone that supports CarPlay to the sled over USB, and CarPlay shows up on the display. For calls and Siri you need a headset, because the display has no microphone. On a sled that is usually a Bluetooth helmet headset, more on that in the helmet headset guide.
If you also ride two up or run a work sled next to your sport sled, keep reading at CarPlay on the Lynx Commander and Xterrain.
Frequently asked questions
Lynx Shredder RE vs DS: is there a difference for CarPlay?
No. Both versions are compatible from model year 2023, as long as the 10.25" display is installed. CarPlay looks and works the same on both.
Rave RE or Rave Enduro: which one gets CarPlay?
Only the Rave RE from 2024 with the 10.25" display. The Rave Enduro has no 10.25" display and is not compatible.
Can I use GPS navigation on the Lynx Shredder with CarPlay?
Yes, with navigation apps on your iPhone that support CarPlay. The map comes from the app on your iPhone and shows up large on the Shredder’s display.