Music plays a different role on the water depending on the model. On a Switch it’s for everyone on deck, behind a Wake Pro it sets the pace for the next set, and while fishing it might just be a quiet podcast. What they all have in common: the phone should stay dry in the storage bin, but the controls should still be within reach. With the M-JET Android Auto activation, you control Spotify and YouTube Music right on the 10.25" display of your Sea-Doo.
What music via Android Auto looks like on a Sea-Doo
Once your phone is on the USB cable, the display shows the apps that support Android Auto. For music, that means Spotify, YouTube Music and other compatible players sit ready as icons. Starting a playlist, skipping a track or switching apps takes a single tap while the phone stays put. If you need a map on an unfamiliar lake, Google Maps is one tap away.
Music by model and use
Switch: tunes for the whole crew
A Switch Cruise Limited or a Switch with the Tech package often carries a few people. Only one phone hangs on the cable, though, and its apps are what you see on the display. Settle whose phone runs the music before you leave the dock, and nobody has to swap cables out on the water.
Wake Pro 230: between sets
Pulling a wakeboarder keeps the driver busy. Set the playlist before the first pull, and between sets one tap gets you the next song. That way your eyes stay on the rider and the rope while you drive.
FishPro Trophy 170: keep it quiet
At the fishing spot an audiobook or podcast usually beats loud music. Spotify has both, and you start and pause them on the display while the phone stays in the bin.
GTX, RXT-X and Explorer Pro: long runs
On longer rides you flip between map and music a lot. You do it on the touch screen, and the map stays in view.
Compatible Sea-Doo models
Android Auto needs the 10.25" display. Which models have it depends on the trim package:
| Model | From model year |
|---|---|
| GTX Limited 325 | 2025 |
| GTX Limited 350 | 2027 |
| RXT-X 325, RXT-X RS 325 | 2026 |
| RXT-X 350 | 2027 |
| RXP-X 325, RXP-X RS 325 | 2026 |
| RXP-X 350, RXP-X 350 Senna | 2027 |
| GTX, GTR-X | 2027 (GTR-X 300 partly from 2026) |
| Wake Pro 230 | 2026 |
| Explorer Pro 170, Explorer Pro 230 | 2026 |
| FishPro Trophy 170 | 2026 |
| Switch Cruise Limited | 2024 |
| Switch with Tech package | 2026 |
| All Switch models with 230 or 300 hp | 2027 |
Models with a 7.6" or 7.8" display are not compatible. More on the individual models is on Sea-Doo Android Auto.
Activation and cable
The included M-JET dongle handles the activation in a single visit to the diagnostic port, then it comes back out. Nothing on the Sea-Doo gets modified. After that you just need an Android phone that supports Android Auto and a USB cable, since Android Auto doesn’t run wirelessly here. Use a cable with some slack so chop doesn’t pull it out of the port, and take the phone with you when you tie up instead of leaving it baking in the bin.
For calls or voice commands to Google Assistant you need a headset, because the display has no microphone. How that works on the water is covered in Android Auto headset. And if there’s an iPhone on board too, CarPlay or Android Auto explains how the two products differ.
Frequently asked questions
What apps show on Android Auto on a Sea-Doo?
The display shows the apps on your phone that support Android Auto, such as Spotify, YouTube Music, Google Maps or Waze.
Can I use YouTube Music on a jet ski?
Yes, on any Sea-Doo with the 10.25" display and the M-JET activation. You then run YouTube Music from the touch screen.
Does Android Auto connect to the Sea-Doo over Bluetooth?
No. Android Auto runs over the USB cable between your phone and the Sea-Doo.