Search for Outlander Android Auto and you mostly get results for the SUV with the same name. This one is about the ATV: the Can-Am Outlander with the 10.25" display. After the Android Auto activation, that screen shows the familiar interface from your Android phone, with Google Maps, Waze, Spotify and YouTube Music. On a quad, though, one question matters that nobody asks in a car: how do you run a touch screen with gloves on, wind in your face and both hands on the bars?
Which Outlander models have the 10.25" display
Depending on the trim package, these models are compatible from model year 2025:
| Model | Versions | From model year |
|---|---|---|
| Outlander 1000 | XT, Backcountry | 2025 |
| Outlander 1000R | XT, Backcountry | 2025 |
If your Outlander has a smaller display, it won’t work. Model year alone doesn’t prove anything, what counts is the screen at the handlebars.
Touch screen with gloves: what helps in practice
On an ATV you almost always wear gloves, and they behave very differently on a touch screen. Thin ones often work fine, thick winter gloves usually don’t. It comes down to the material, so there’s no blanket answer. A few habits make the difference:
- Test first, then ride: Try your usual gloves on the display once while parked, before you count on them out on the trail.
- Input before you roll: Typing a destination into Google Maps or picking a playlist in Spotify is best done standing still. On the move you only need single taps.
- Go for big targets: Skipping a track or tapping the map is easier than typing. Save longer input for the next stop.
- Steady hand: Small buttons are hard to hit on rough ground. Pull over for a second instead of hunting around with one hand on the bars.
What actually matters on an ATV
On the Outlander the display sits right in front of you, no roof, right out in the wind. A glance at the map, a tap for the next song, and that’s about all you need on the move. Android Auto is built for exactly that, with big icons and few menu levels. For rides down logging roads or out to a fishing lake, a map on the big screen beats a phone buzzing on the handlebar every time.
Activation and connection
The M-JET dongle is included and plugs into the Outlander’s diagnostic port one time. After the activation you pull it, and nothing on the quad gets modified. From then on you connect your Android phone that supports Android Auto with a USB cable. There’s no wireless option, the cable is a must.
Cable and phone on an open machine
A quad has no cab, so the cable and phone get hit by mud, rain and branches. Put the phone in a closed storage compartment and route the cable so it doesn’t get stretched when you turn the bars. At full lock there should still be some slack. After a mud run, take a look at the plug and the port before you connect next time.
For calls and Google Assistant: the display has no microphone, so you need a Bluetooth headset paired to your phone, on an ATV usually built into the helmet. More in Android Auto headset. If you also run a side-by-side for work, check out Can-Am Defender Android Auto. The full Can-Am lineup is on Can-Am Android Auto.
Frequently asked questions
Does Android Auto work wirelessly on the Outlander?
No. Android Auto on the Outlander runs only over a USB cable between your phone and the machine.
Is there Android Auto for ATVs?
Yes, for the Can-Am Outlander 1000 and 1000R in XT and Backcountry from model year 2025 with the 10.25" display. It takes the one-time M-JET activation.
Can I use the Outlander touch screen with gloves?
That depends on the glove. Test your own while parked, and handle longer input before the ride or at a stop.