Out in the sand you lose your bearings faster than you’d think. After the third ridge every dune looks the same, and the wind has already half erased your tracks from an hour ago. Trails aren’t much different, just with more forks. Having the map on a big screen instead of on a phone shaking in a mount makes the whole ride calmer. The M-JET Android Auto activation brings exactly that to the factory 10.25" display of the Maverick R and Maverick X3.
Maverick R or Maverick X3: which ones qualify?
Both lineups are compatible, but from different model years and only with the 10.25" display, which depends on the trim package.
| Model | From model year |
|---|---|
| Maverick R | 2024 |
| Maverick X3 | 2026 |
An X3 from 2025 or earlier is out, and so is any Maverick with a 7.6" or 7.8" display. And if you had the Can-Am Commander in mind as an alternative: it has no 10.25" display, so it’s not compatible.
Navigating the dunes
Open sand has almost no landmarks. Google Maps on the 10.25" display shows where you are and which way camp or the staging area lies. Save your starting point as a place in the app before you head out, and you’ll find your way back at sundown no matter how many loops you ran. How accurate the map is off the beaten path depends on the app and your phone’s signal, not on the display.
Navigating the trail system
On a trail network with lots of junctions, the map pays off at every fork. A quick glance down replaces stopping, pulling off a glove and fishing out your phone, and over a long day that adds up to a lot of saved stops. Plan the route at the trailhead in your navigation app while the Maverick is parked. Strapped in with a helmet on, tapping around while moving is awkward anyway, and your eyes belong on the terrain.
Besides maps, Spotify and YouTube Music run on the touch screen as well. Switching between navigation and music takes one tap, and the phone stays put in its cubby.
Set it up once, then ride
The activation itself is quick. The included M-JET dongle plugs into the diagnostic port one time, then you pull it and it never goes back in. No modifications. From then on you connect an Android phone that supports Android Auto with a USB cable, and the interface appears on the display. It doesn’t work wirelessly.
Sand, dust and the USB cable
Fine sand gets into everything. Don’t leave the cable lying loose in the cockpit when you park, and knock the plug clean before you plug it in. Your phone belongs in a storage spot where it won’t go flying over whoops and jumps. Pick a cable length that leaves some slack so nothing gets yanked when the ride gets rough.
Calls under a helmet
Calls and voice commands to Google Assistant need a headset, since the display has no microphone. In a Maverick that’s usually a helmet headset paired to your phone over Bluetooth. What to look for is covered in Android Auto headset.
If someone in your group runs an iPhone, the CarPlay activation is the matching counterpart. ATV riders can head over to Android Auto on the Outlander, and every Can-Am model is listed on Can-Am Android Auto.
Frequently asked questions
Does the Can-Am Maverick X3 have Android Auto?
Yes, if it’s a 2026 or newer with the 10.25" display. Then the one-time M-JET activation is all it takes. X3 models up to 2025 are not compatible.
What year Maverick R can get Android Auto?
The Maverick R is compatible from model year 2024, as long as it has the 10.25" display.
Do I still need a phone mount in my Maverick for navigation?
No. The map runs on the factory display. Your phone can stay stowed, it just needs to be connected to the machine with a USB cable.