Android Auto for the 10.25" Display on Sea-Doo, Can-Am, Ski-Doo and Lynx
Google Maps filling the dash, your Spotify playlist one tap away and your phone tucked away instead of strapped to the handlebars: that is what Android Auto brings to the 10.25" touchscreen on your Sea-Doo, Can-Am, Ski-Doo or Lynx. The Android Auto activation for 10.25" displays turns the original screen into the front end for your Android phone. No new hardware goes on the vehicle.
If you already know what you ride, the brand pages go deeper: Sea-Doo Android Auto, Can-Am Android Auto, Ski-Doo Android Auto and Lynx Android Auto.
Which apps show up on the display
Android Auto does not simply mirror your whole phone. The display shows apps built for Android Auto, with big buttons and a layout you can take in at a glance. On the water, on the trail and in the snow, two groups matter most:
- Maps: Google Maps or Waze run full size on the 10.25" screen. Turns and route stay easy to read with a helmet and goggles on, no need to stop and dig out your phone.
- Audio: Spotify, YouTube Music and other music or podcast apps are controlled right on the touchscreen. Skip a song, start a playlist, pause an episode, all without picking up the phone.
What you cannot do is talk to the display, because it has no built-in microphone. For calls and Google Assistant you need a headset, usually a Bluetooth helmet headset paired with your phone. Our guide to headsets for Android Auto covers what makes sense on a PWC, in a UTV and on a sled.
Getting Android Auto in four steps
- Check the display: Find your model and model year in the table below and make sure the 10.25" screen is really installed. On the same model, the trim package often decides which display you get.
- Plug in the dongle: The M-JET dongle is included. It goes into the diagnostic port of the vehicle one single time.
- Unplug the dongle: Once the activation has finished, take it off again. Nothing stays on the vehicle and nothing gets modified.
- Connect your phone: From then on you plug your Android phone in with a USB cable and Android Auto appears on the display.
Each activation belongs to exactly one vehicle. If you ride a Defender in summer and a Summit in winter, each one gets its own activation.
What you need
- an Android phone that supports Android Auto
- a USB cable that fits your phone, since the connection is wired and not wireless
- a vehicle from the table with the 10.25" display installed
Carrying an iPhone? Then this is the wrong product for you. Apple users get the CarPlay activation, a separate product for the same vehicles. How the two compare is explained in CarPlay or Android Auto.
Compatible models across all four brands
Every entry depends on the trim package and applies only with the 10.25" display. Vehicles with a 7.6", 7.8" or smaller screen are not compatible. On Lynx sleds the big display was often an option, for example through spring ordering. For the work UTV, read Android Auto in the Can-Am Defender, and for practical winter tips see Android Auto on a snowmobile.
| Brand | Model | From model year |
|---|---|---|
| Sea-Doo | GTX Limited 325 | 2025 |
| Sea-Doo | GTX Limited 350 | 2027 |
| Sea-Doo | RXT-X 325 and RXT-X RS 325 | 2026 |
| Sea-Doo | RXT-X 350 | 2027 |
| Sea-Doo | RXP-X 325 and RXP-X RS 325 | 2026 |
| Sea-Doo | RXP-X 350 and RXP-X 350 Senna | 2027 |
| Sea-Doo | GTX and GTR-X | 2027 (GTR-X 300 partly from 2026) |
| Sea-Doo | Wake Pro 230 | 2026 |
| Sea-Doo | Explorer Pro 170 and 230 | 2026 |
| Sea-Doo | FishPro Trophy 170 | 2026 |
| Sea-Doo | Switch Cruise Limited | 2024 |
| Sea-Doo | Switch with Tech package | 2026 |
| Sea-Doo | all Switch models with 230 or 300 hp | 2027 |
| Can-Am | Maverick R | 2024 |
| Can-Am | Outlander 1000 and 1000R (XT and Backcountry) | 2025 |
| Can-Am | Maverick X3 | 2026 |
| Can-Am | Defender HD11 (Limited, X mr, Lonestar) | 2026 |
| Can-Am | Defender HD10 (Limited, X mr, Lonestar) | 2027 |
| Ski-Doo | Summit X and Summit X with Expert package | 2023 |
| Ski-Doo | Freeride | 2023 |
| Ski-Doo | MXZ X-RS | 2023 |
| Ski-Doo | MXZ X | 2025 |
| Ski-Doo | Renegade X and X-RS | 2024 |
| Ski-Doo | Grand Touring LE with Luxury package | 2024 |
| Ski-Doo | Backcountry X and X-RS | 2025 |
| Ski-Doo | Expedition SE | 2026 |
| Lynx | Shredder RE and Shredder DS | 2023 |
| Lynx | Rave RE | 2024 |
| Lynx | Xterrain RE | 2024 |
| Lynx | Xterrain Limited | 2026 |
| Lynx | Brutal RE | 2025 |
| Lynx | Adventure Limited (900 ACE Turbo) and Adventure Electric | 2025 |
| Lynx | Commander RE and Commander Limited (900 ACE Turbo) | 2026 |
| Lynx | 69 Ranger PRO (900 ACE Turbo R) | 2027 |
Later model years are included as well, as long as the 10.25" display is installed.
Frequently asked questions
Can you retrofit Android Auto if the 10.25" display is already installed?
Yes, that is exactly what the activation is for. The screen is already in the vehicle and simply gains Android Auto. You do not swap the display, the wiring harness or any mounts.
How do I enable Android Auto on the 10.25" display?
Run the activation once with the M-JET dongle through the diagnostic port, unplug the dongle and then connect your phone with a USB cable. From that point Android Auto shows up on the screen.
Is there wireless Android Auto on a PWC, UTV or snowmobile?
No. On these vehicles Android Auto always runs over the USB cable between your phone and the vehicle.
Calls and Google Assistant? The display has no built-in microphone. A Bluetooth headset paired with your phone, for example in your helmet, handles calls and voice commands.