The iBR system (intelligent Brake and Reverse) provides braking, neutral and reverse on many Sea-Doo models and related BRP technology. After work on the system or with certain faults, an iBR reset may be required. With the M-JET DIAGNOSTIC you can carry it out yourself.
What does an iBR reset do?
During the reset, the control of the iBR actuator is re-adjusted so that the end positions of the gate are detected correctly again. This matters, for example, after replacing components or after mechanical work.
Which vehicles are affected
The iBR system is found not only in Sea-Doo jetskis, but also in many boats using BRP Rotax technology. These include Scarab jet boats and Williams Jet Tenders, which use the same drive and control base.
How to proceed
- Plug in the dongle and open the M-JET DIAGNOSTIC app
- Connect the vehicle via Bluetooth
- Select the iBR Reset function in the service section
- Follow the instructions and complete the procedure
Important: a stable power supply
Service actions such as the iBR reset should only be performed with a stable onboard voltage. For Sea-Doo vehicles the M-JET CTEK charging adapter is a good choice.
When you need to go deeper
For faulty iBR control units or more extensive work, the specialised M-JET IBR BENCH FLASHER works directly on the module.
Conclusion
The iBR reset is a good example that M-JET DIAGNOSTIC can do far more than read faults. You handle real service work yourself, safely and transparently.
