Yamaha GP1300R: YPVS Fault (Code 100) Check

On the GP1300R the control unit reports an irregular signal from the YPVS with code 100. That is a case for the component test: M-JET DIAGNOSTIC activates the adjustment and you see whether it moves.

What you do

• Read the fault memory and check whether code 100 is active
• Activate the YPVS in the component test
• Check connector and wire of the adjustment
• Clear the memory and cross-check with a test ride

Classification

If the adjustment responds in the test, the actuator can basically move, and the cause is often in the contact or in a sporadic signal problem. If the movement does not occur, dirt, wiring or the actuator itself is in focus. The test gives you this distinction before you order a part. Only carry out work on the drive when the craft is secure.

Related topics

• Yamaha GP1300R: Overheat Warning and Exhaust Manifold Temperature
• Yamaha GP1300R Won't Start: Check Ignition, Injectors, Pump
• Reading Yamaha WaveRunner Fault Codes
• Diagnostics and fault codes for your Yamaha model
• All Yamaha WaveRunner diagnostics topics

Everything runs via app over Bluetooth, for Yamaha WaveRunners from model year 2002 to today. Learn more about the M-JET DIAGNOSTIC for Yamaha WaveRunner.